Buffer module SSE1205 - DC-UPS with supercapacitors

FEAS article number 621205

Price per unit:
€316.20 *

Prices ex works, plus packaging, shipping (and VAT / DE)

Quantity Unit price Discount
To 2 €316.20 * 0 %
From 3 €309.88 * 2 %
From 5 €300.39 * 5 %
From 10 €294.07 * 7 %
From 20 €287.74 * 9 %
From 50 €284.58 * 10 %

Prices ex works, plus packaging, shipping (and VAT / DE)

available from stock
DC UPS for bridging short-term mains failures, support during peak loads or during... more
Product information "Buffer module SSE1205 - DC-UPS with supercapacitors"

DC UPS for bridging short-term mains failures, support during peak loads or during switching operations

The SSE1205 buffer module stores the required energy in internal super capacitors. Thus, these uninterruptible power supplies (UPS) are absolutely maintenance-free. A rechargeable battery is not installed.

Fully encapsulated in an aluminium housing, the capacitor-based buffer module is characterised by vibration resistance, industrial and tropical suitability.

How to install the DC UPS / buffer module?

The buffer module (DC UPS with electrolytic capacitors) is either connected in parallel directly into the regulated DC circuit at any point or used for selective protection of critical consumers. This prevents malfunctions in control systems due to short-term interruptions in the power supply and considerably increases the reliability of the overall system.

  • DC UPS / DC buffer module  for 12 VDC systems
  • With supercaps - no accumulator - maintenance-free
  • Support for short-term increased power demand
  • Relay for remote monitoring the supply voltage
  • Operating status shown by LED
  • Short charging times
  • Extra low safety potential
  • Long lifetime
  • Simple wiring, easy handling
  • Overload- and open circuit protected
  • Parallel connection possible
  • Compact design
  • Suitable for the tropics - epoxy resin casted
  • Safety acc. to VDE, EN, UL, CSA
Technical data more
Technical data "Buffer module SSE1205 - DC-UPS with supercapacitors"
Input voltage (VDC): 11.5 - 18.0 VDC
Buffer voltage: 11.0 VDC
Output current: max. 20.0Amp.
Hold up time:  typ. 10.0Amp. 33sec.
Stored energy: max. 4.5 Wh / 16.2 kJ
Charging current: 1.5 Amp.
Charging time:  max.22 min.
Residual ripple: < 50mVrms
Operating temperature range: -30°C / +65°C
Dimensions (WxHxD): 64.0 x 100.0 x 120.0 mm
Weight: 1.4 kg
Mounting: On rails acc. to DIN 46277 or wall mounting with screws
Downloads "Buffer module SSE1205 - DC-UPS with supercapacitors"

Product specification SSE1205 (451,8 KB)

Further information about buffer module SSE1205

Öffnen/Herunterladen

Manual SSE05 (954,9 KB)

Operating instructions for buffer moduls of the series SSE05

Öffnen/Herunterladen

Data sheet SSE1205 (563,8 KB)

Technical data for buffer module SSE1205

Öffnen/Herunterladen
Dimensions "Buffer module SSE1205 - DC-UPS with supercapacitors"
Dimensions Buffer module SSE1205 - DC-UPS with supercapacitors
Viewed